Top 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.

Don't ignore the forklift at the office. If the procedure is bad, there will be severe accidents in mins, and there are many accidents including forklifts.

Case 1: The forklift cargo obstructed the driver's view, and the person ahead might not be discovered, leading to a rolling accident.
Situation 2: In order to maintain the balance of the forklift when lifting heavy goods, the staff members utilized their body weight as the weight, which nearly created casualties.
Situation 3: The size of the forklift cargo exceeds the allowable width of the course and hangs on the roadside shelf, which almost causes an crash.
Instance 4: Forklift is speeding and rolls over throughout a turn.
Case 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not discover the forklift.
Instance 6: The forklift raises the employees illegally, the forklift chauffeur does not wear the safety belt, the forklift lifter falls and the motorist is crushed when the forklift surrender.
Case 7: The forklift chauffeur did not use a seat belt and dropped from the lorry when it rolled over and was squashed.
Forklift operation should pay attention to these matters ：.

Start.
1. Prior to beginning, observe the surroundings, and after validating that there are no barriers that hinder the safety of driving, beep the horn initially and after that begin.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) gauge have to be secure before beginning.
3. When the forklift starts with a tons, the chauffeur must initially validate that the lots is stable and reputable.
4. The beginning has to be slow-moving and constant.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the pole should be tilted backward. .
2. Do not lift the fork too expensive when driving. When entering and leaving the work site or while driving, beware that there will certainly be no challenges in the sky. When the tons is taking a trip, the fork must not be elevated too expensive, which will impact the security of the forklift. .
3. After dumping, the fork needs to be decreased to the regular driving setting prior to driving. .
4. When turning, if there are pedestrians or vehicles nearby, the driving signal needs to be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will create the automobile to shed side security and tip over. .
5. When the forklift is downhill, it is strictly restricted to switch off the flame and slide, and it is forbidden to brake all of a sudden while driving with tons unless there are special scenarios.
6. When the forklift is running, it must follow the website traffic rules in the factory and have to maintain a certain security range from the vehicle in front. .
7. When the forklift is running, the load must remain in the lowest setting that does not prevent the driving, and the gantry needs to be properly tilted back. The tons will not be increased except when stacking or filling. .
8. The height of the load should not block the driver's sight. In unique conditions, when the product impacts the forward vision, drive at a low rate when reversing.
9. It is restricted to switch on the ramp, neither to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility area is 5 km/h, and it must drive securely at a reduced rate when entering the manufacturing workshop location. .
11. When the forklift is raised, raised or driven, it is restricted for workers to stand on the fork to hold things and play a stabilizing function. .
12. If problems are found, they will be repaired and reported in a prompt manner, and they will certainly never run with ailments or conceal them.

loading and discharging.
1. When fork-loading products, the distance between both forks ought to be changed as needed to make the lots of both forks well balanced and not skewed, and one side of the item ought to be against the shelf. .
2. It is restricted to collaborate with a solitary fork or use a fork top or draw. In special circumstances, safety and security indication must be established to remind surrounding pedestrians. .
3. In the process of filling and discharging items, the forklift needs to be braked with the brake. .
4. The speed of the car need to be sluggish and steady. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled items and injure people. .
5. When making use of a fork to fork the goods, the fork should be as deep as feasible under the load, and it ought to be kept in mind that the fork suggestion must not touch other products or things. The load must be stabilized with very little back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted ahead a little when the load is reduced to permit easy placement of the lots and removal of the forks. .
6. It is forbidden to fork products at broadband and ram hard items with the fork head. .
7. When the forklift is functioning, it is restricted for people to loaf the fork, so regarding stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is banned, and it is prohibited to use forks to lift workers to take part in high-altitude procedures to avoid high-altitude falling accidents. .
9. It is not enabled to utilize the brake inertia to slide, place, round or roll items. .
10. It is not permitted to utilize forks to select, turn pallet dump.

Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you should unload the goods or lower the fork frame.
2. Pull the parking brake deal with to dead or depress the emergency brake switch.
3. The engine is shut off and the power is cut off. (Except for special circumstances, such as the chauffeur does not leave the car's line of sight and does not exceed 1 minute).
4. Remove the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look ought to be checked, and fuel, lubing oil and air conditioning water must be included.
2. Inspect the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete Electric Forklift Truck for Warehouse and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature level are typical.
5. After the forklift is running, the outside leakage needs to additionally be inspected and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the car;.
2. When you run into a person in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be as well sharp to prevent the propensity of " complimentary switching";.
6. Running up and down the incline must be slow and consistent, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel bring the goods and move forward, if they come across large or heavy items and go to the vehicle driver's line of vision, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Single fork procedure is not permitted.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not enabled to straight Electric Forklift Truck for Warehouse shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not permitted to use inertia force to get the goods.
6. It is not permitted to use braking pressure to expatriation round or easy-to-roll objects.
7. It is not enabled to bring individuals to work with the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Auto parking is not allowed under the list below conditions.
1. Curves, narrow roadways, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the area with the very same size as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844